Colson Catalog 2020

103 6926 9.6930 6906 9.6914 6905 9.6913 www.colsoncaster.com Parts & Accessories Bumpers Corner / Continuous Bumpers End Bumpers Corner Bumpers Grey corner bumpers with matching strip bumpers provide 100% protection to the full perimeter of equipment. Strip bumpers are made with flat steel inserts for permanent attachment. Inserts in strip bumpers are not predrilled. They can be easily cut to size with a hacksaw and drilled as needed. Temperature Range: -45°F to 180°F. 06926 Insert 6 3 / 16 " 3 1 / 16 " 1 1 / 2 " 1 1 / 8 "-1 3 / 4 " 2( 17 / 64 ") in 6" side Pre-drilled 1( 17 / 64 ") in 3" side 9.6930 * Insert Specify (16 ft. max., 1ft. inc.) 1 1 / 2 " 1" – 66930 No Insert Specify (50 ft inc.) 1 1 / 2 " 1" – 06906 Insert 2 5 / 8 " each side 1 1 / 8 " 1" 2( 13 / 64 ") each side 9.6914 * Insert Specify (16 ft. max. 1ft. inc.) 1 1 / 8 " 1" – 66914 No Insert Specify (50 ft inc.) 1 1 / 8 " 1" – 06905 Insert 2 1 / 2 " each side 3 / 4 " 3 / 4 " 2( 1 / 8 ") each side Pre-drilled 9.6913 * Insert Specify (20 ft. max. 1ft. inc.) 3 / 4 " 5 / 8 " – 66913 No insert Specify (50 ft inc.) 3 / 4 " 5 / 8 " – Model Number Steel Inserts Width Thickness Mounting Holes Long Side Short Side Length *Strip bumper with insert available in 10, 12, 16 and 20 ft. pre-cut lengths. Consult factory. Generally used on the ends of tubular handles. Available in 3 1 / 4 " and 1 3 / 4 " diameters. Easily attached, they are soft enough to absorb noise and shock but hard enough to wear for years. 06901 3 1 / 4 " 11 / 32 " 7 / 8 " 06901.01 1 3 / 4 " 9 / 32 " 1 / 2 " Model Number Dia. Hole Dia. Thickness A heavy duty bumper with an extra rounded build- up on the apex of the corner where shocks and wear are greatest. Ends are tapered and rounded. Each side is 3" long and 1 1 / 8 " wide at the base. 2 ( 3 / 16 ") 06927 1 5 / 16 " 1" on each side Model Number Thickness at Corner Thickness at Ends Mounting Holes